![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() ![]() |
![]() |
|
![]() |
งานราชการ | ![]() |
หางาน สมัครงาน | ![]() |
ฝากประวัติ | ![]() |
เข้าระบบ | ![]() |
ค้นประวัติ | ![]() |
ประกาศงาน | ![]() |
อัตราค่าโฆษณา |
|
ข้อมูลที่ปรากฎเป็น "สมาชิกเท่านั้น" ข้อมูลจะเปิดเผยเฉพาะสมาชิกเท่านั้น สำหรับสมาชิกต้องทำการ เข้าระบบ ก่อน หรือ
ต้องการสมัครสมาชิกกรุณาโทร 02-085-9900 , 088-676-5233 หรือ ดูวิธีการสมัครและอัตราค่าสมาชิกได้ที่นี่ |
เก็บประวัติไว้ในระบบ | พิมพ์ |
ข้อมูลส่วนตัว |
ปรับปรุงข้อมูลเมื่อ : | 10 สิงหาคม 2562 |
![]() |
หางานครั้งสุดท้ายเมื่อ : | 17 สิงหาคม 2562 | |
ชื่อ - นามสกุล : | สมาชิกเท่านั้น | |
วันเกิด : | 25 กุมภาพันธ์ 2529 | |
อายุ : | 39 ปี | |
ส่วนสูง : | ส่วนสูง : 175 ซม. น้ำหนัก : 75 กิโลกรัม | |
เพศ : | ชาย | |
สถานะสมรส : | สมรส | |
สัญชาติ : | ไทย | |
ศาสนา : | พุทธ | |
สถานะภาพทางทหาร : | รด |
ข้อมูลในการติดต่อ |
อีเมล์ : | สมาชิกเท่านั้น |
ที่อยู่ : | สมาชิกเท่านั้น |
จังหวัด : | อุดรธานี |
รหัสไปรษณีย์ : | สมาชิกเท่านั้น |
โทรศัพท์ : | สมาชิกเท่านั้น |
มือถือ : | สมาชิกเท่านั้น |
Fax : | สมาชิกเท่านั้น |
ความพร้อมในการเริ่มงาน |
พร้อมทำงาน : | เริ่มทำงานได้เลย |
สถานะการทำงาน : | มีงานทำแล้ว แต่ต้องการเปลี่ยนงาน |
ประวัติการศึกษา |
ปัจจุบัน : | จบการศึกษาแล้วในปี พศ. 2550 |
1. การศึกษาสูงสุด | |
ระดับการศึกษา : | ปวส. |
ชื่อสถานศึกษา : | รร.ขอนแก่นบริหารธุรกิจ |
วุฒิการศึกษา : | ปวส. |
สาขาวิชา : | อิเล็คทรอนิคไฟฟ้า |
เกรดเฉลี่ย (GPA.) : | 2.9 |
2 การศึกษาก่อนหน้า | |
ระดับการศึกษา : | ปวช. |
ชื่อสถานศึกษา : | รร.ขอนแก่นบริหารธุรกิจ |
วุฒิการศึกษา : | ปวช |
สาขาวิชา : | อิเล็คทรอนิคคอม |
เกรดเฉลี่ย (GPA.) : | 3.3 |
ตำแหน่งงานที่ท่านสนใจ |
สาขาวิชาที่ได้ศึกษามา : | วิศวกรรมสาขาอื่นๆ |
ประเภทงานที่สนใจ : | 1. โรงงาน/การผลิต/ควบคุมคุณภาพ 2. ผู้จัดการทั่วไป/ผู้อำนวยการ/งานผู้บริหาร |
ตำแหน่งงานที่สนใจ : | 1. injection supervisor 2. mold fitting & QA and QC 3. injection asistant manager |
ลักษณะงานที่ต้องการ : | งานประจำ (Full Time) |
ระดับเงินเดือนที่ต้องการ : | 27500 บาท |
ประวัติการทำงาน |
ประสบการณ์ทั้งหมด : | 12 ปี |
1. ประสบการณ์ทำงาน | |
เริ่มจาก : | กันยายน 2559 ถึง 2562 |
บริษัท : | สมาชิกเท่านั้น |
ที่อยู่บริษัท : | ต.มิตรภาพ อ.สีคิ้ว จ.นครราชสีมา |
ตำแหน่ง : | injection supervispr |
เงินเดือน : | สมาชิกเท่านั้น บาท |
ลักษณะงานที่ทำ : | Manpower and production planing / analysis of broblem and defective production process. set condition standard. test new model new mold, PM, Fitting Mold, Assembly Mold. Plastic Injection Section control. 1.To control and monitory production plastic injection to have follow up the master plan by Production Control Section and Follow up the our output target specify. 2.To improvement and summary KPI report of assembly and report to production Manager by PDCA report. 3.To control production yield and improvement of line injection. 4.To making and control capacity in process 5.To improvement & produce activity in order to develop efficiency, productivity, quality and cost etc. 6.Increase productivity up by 6.1 Action Mold and Machine equipment problem - Making visualization of the Mold and Machine 6.2. Making process innovation of injection - Reduce 1st NG. & 2nd NG. Of process injection 6.3. Making Standard for plastic injection process - Making production working instruction (Injection condition standard, Working - Standard) 7.To analyze (why why analyze) and solving the defect problem Plastic injection . 8.To take care and verify first product sample (prepare making) approval and report to section manager and customer. 9.Control 4M Change and Corrective action report to customer. 10.Control standard of production and making standardization, working standard. 11.Checking & audit operation of employee to follow the safety method. 12.Skill up to operator by training, skill map/skill degree 13.Control process scrap in process 14.Analyze, control and summary every month 15.To manage manpower 30 person 16.To control budget follow to the budget plan. 17.To control and support activity -ISO9001:2001 -ISO14001 / ISO/TS16949 -WIT -CB & CR -QCC. -KAIZEN, KYT -TPM. -5-S & SAFETY HEAD |
2. ประสบการณ์ทำงาน | |
เริ่มจาก : | กุมภาพันธ์ 2554 ถึง กันยายน 2559 |
บริษัท : | สมาชิกเท่านั้น |
ที่อยู่บริษัท : | อมตะชิตี้ ต.มาบยางพร อ.ปลวกแดง จ.ระยอง |
ตำแหน่ง : | injecton supervisor |
เงินเดือน : | สมาชิกเท่านั้น บาท |
ลักษณะงานที่ทำ : | manpower and production planing / analysis of broblem and defective production process. set condition standard. test new model new mold, PM, Fitting Mold, Assembly Mold. Plastic Injection Section control. 1.To control and monitory production plastic injection to have follow up the master plan by Production Control Section and Follow up the our output target specify. 2.To improvement and summary KPI report of assembly and report to production Manager by PDCA report. 3.To control production yield and improvement of line injection. 4.To making and control capacity in process 5.To improvement & produce activity in order to develop efficiency, productivity, quality and cost etc. 6.Increase productivity up by 6.1 Action Mold and Machine equipment problem - Making visualization of the Mold and Machine 6.2. Making process innovation of injection - Reduce 1st NG. & 2nd NG. Of process injection 6.3. Making Standard for plastic injection process - Making production working instruction (Injection condition standard, Working - Standard) 7.To analyze (why why analyze) and solving the defect problem Plastic injection . 8.To take care and verify first product sample (prepare making) approval and report to section manager and customer. 9.Control 4M Change and Corrective action report to customer. 10.Control standard of production and making standardization, working standard. 11.Checking & audit operation of employee to follow the safety method. 12.Skill up to operator by training, skill map/skill degree 13.Control process scrap in process 14.Analyze, control and summary every month 15.To manage manpower 30 person 16.To control budget follow to the budget plan. 17.To control and support activity -ISO9001:2001 -ISO14001 / ISO/TS16949 -WIT -CB & CR -QCC. -KAIZEN, KYT -TPM. -5-S & SAFETY HEAD |
3. ประสบการณ์ทำงาน | |
เริ่มจาก : | มิถุนายน 2550 ถึง มกราคม 2554 |
บริษัท : | สมาชิกเท่านั้น |
ที่อยู่บริษัท : | อมตะนคร อ.เภอพานทอง จ.ชลบุรี |
ตำแหน่ง : | Leader injection |
เงินเดือน : | สมาชิกเท่านั้น บาท |
ลักษณะงานที่ทำ : | set up machin /contro manpower /set condition standand / mold PM-mold repair / |
ความสามารถ |
ความสามารถทางภาษา | |||
ภาษา | พูด | อ่าน | เขียน |
1. ภาษาไทย | พอใช้ | พอใช้ | พอใช้ |
2. ภาษาอังกฤษ | พอใช้ | พอใช้ | พอใช้ |
3. ญี่ปุ่น | พอใช้ | ||
ความสามารถอื่นๆ | |||
พิมพ์ดีด : | ภาษาไทย 30 คำ/นาที ภาษาอังกฤษ 30 คำ/นาที | ||
ความสามารถในการขับขี่ : | รถยนต์ , | ||
ยานพาหนะส่วนตัว : | รถยนต์ , | ||
ความสามารถพิเศษอื่นๆ : | วาดภาพ กีฬาฟุตบอล ตนตรี |
Power By www.thaieasyjob.com |
เก็บประวัติไว้ในระบบ | พิมพ์ |
|
ผู้หางาน![]() ![]() ![]() ![]() ![]() ![]() |
บริษัทหาประวัติ ประกาศงาน![]() ![]() ![]() ![]() ![]() |
ติดต่อ ThaiEasyJob.com![]() ![]() ![]() |
© copyright 2004-2025 All right reserved. Contact us : webmaster@thaieasyjob.com | ข้อตกลงการใช้บริการ |